En 10204 3 1 Specification
fermiwords

En 10204 3 1 Specification

20097695857222
EN 10204:2004 (E) Foreword This document (EN 10204:2004) has been prepared by Technical Committee ECISS/TC 9 Technical conditions of delivery and quality control, the secretariat of which is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2005, and conflicting national standards shall be withdrawn at the latest by April 2005.This document supersedes EN 10204:1991.This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives 97/23/EC.For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document.

The main changes are: new definitions: manufacturer , intermediary, product specification; reduction of the number of inspection documents: type 2.3 of the previous edition has been deleted; type 3.1 replaces type 3.1.B of the previous edition; type 3.2 replaces types 3.1.A, 3.1.C and the inspection report 3.2 of the previous edition.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EN 10204:2004 (E) 3.2 Test report type 2.2 Document in which the manufacturer declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results based on non-specific inspection.4 Inspection documents based on specific inspection 4.1 Inspection certificate 3.1 type 3.1 Document issued by the manufacturer in which he declares that the products supplied are in compliance with the requirements of the order and in which he supplies test results.The test unit and the tests to be carried out are defined by the product specification, the official regulation and corresponding rules and/or the order.The document is validated by the manufacturers authorized inspection representative, independent of the manufacturing department.

It shall be permissible for the manufacturer to transfer on to the inspection certificate 3.1 relevant test results obtained by specific inspection on primary or incoming products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required.4.2 Inspection certificate 3.2 type 3
en 10204 3 1 specification
.2 Document prepared by both the manufacturers authorized inspection representative, independent of the manufacturing department and either the purchasers authorized inspection representative or the inspector designated by the official regulations and in which they declare that the products supplied are in compliance with the requirements of the order and in which test results are supplied.It shall be permissible for the manufacturer to transfer on to the inspection certificate 3.2 relevant test results obtained by specific inspection on primary or incoming products he uses, provided that the manufacturer operates traceability procedures and can provide the corresponding inspection documents required.5 Validation and transmission of inspection documents The inspection document shall be validated by the responsible person(s) (name and position).The retention and transmission of documents shall be either in electronic data or paper form.EN 10204:2004 (E) Annex A(informative)

Summary of inspection documents A summary of the inspection documents is given in Table A.1.Table A.1

Summary of inspection documents EN 10204 Designation of the document type Document

Document Reference English version German version French version content validated by Type 2.1 Declaration of compliance with the order Werksbeschei-nigung Attestation de conformit

la commande Statement of compliance with the order The manufacturer Type 2.2 Test report Werkszeugnis Relev de contrle Statement of compliance with the order, with indication of results of non-specific inspection The manufacturer Type 3.1 Inspection certificate 3.1 Abnahmeprf-zeugnis 3.1 Certificat de rception 3.1 Statement of compliance with the order, with indication of results of specific inspection

The manufacturers authorized inspection representative independent of manufacturing department Type 3.2 Inspection certificate 3.2 Abnahmeprf-zeugnis 3.2 Certificat de rception 3.2 Statement of compliance with the order, with indication of results of specific inspection

The manufacturers authorized inspection representative independent of manufacturing department and either the purchasers authorized inspection representative inspector designated by the official regulations EN 10204:2004 (E)

Non-specific inspection may be replaced by specific inspection if specified in the material standard or the order.

Quality management system of the material manufacturer certified by a competent body established within the Community and having undergone a specific assessment for materials.Figure ZA.1

Conformity with Annex I section 4.3 of Directive 97/23/EC EN 10204:2004 (E) Bibliography [1] EN 10168, Steel products - Inspection documents

List of information and normNBN EN 10204Producten van metaal - Soorten keuringsdocumentenProduits mtalliques - Types de documents de contrle2e uitg., januari 2005Normklasse: A 02Metallic products - Types of inspection documentsBelgisch instituut voor normalisatie (BIN),

vereniging zonder winstoogmerkBrabanonnelaan 29 - 1000 BRUSSEL - telefoon: 02 738 01 12 - fax: 02 733 42 64e-mail: info@bin.be

- BIN Online: www.bin.be - prk.

000-0063310-66Prijsgroep: 11Toelating tot pu
© 2012 labroda
Downloadic - infolari - Contact · Privacy Policy